aviation projects

Explore Our Projects

Projects That Drive Real-World Results

From remote airstrips to critical infrastructure, our aviation projects showcase the strength, safety, and flexibility of our custom-built refuelling systems. We’ve delivered EPA-approved fuel trailers, low-profile helicopter tanks, and rugged mobile units for operations across Australia and overseas. Explore how we support aviation clients, from emergency services to international aero clubs with reliable, compliant, and innovative fuelling solutions designed for demanding conditions.

Trailer 3400L Aviation with DGA

Trailer 3400 litre Aviation with Dangerous Goods Approvals

Tanker JET-A1 5500 Litres

JET-A1 Tanker 5500 litre with Dangerous Goods Approval. Fully equipped aviation refueller with over and under wing nozzles.

Tanks Self-Bunded JET-A1 for RFDS

Design and construction of custom tanks with JET-A1 dispensing systems with diesel engine-powered pumps for standalone operation.

Pump Manual Aviation

AFSE has a configurable manual pump which is ideal for dispensing from drums or small tanks where the location just cannot support a powered pump system.

Trailer AVGAS for Yokota Aero Club

Back in 2001 we were approached by the Kadena Aero Club which is based in the USAF Base on Okinawa Japan. They saw our aviation refuelling trailers on our web site and subsequently we have supplied them with two trailers and a demountable system which they intermittently use mounted on a small truck.

Fly in - Fly out Refuelling Systems

Australian Fuelling Systems have designed, built and delivered many stand-alone aviation fuelling systems for very remote mine sites. These are used to ensure adequate fuel is available for aircraft on the way back to base.

Trailer AvCat DG

A 1000 Litre Avcat Trailer with all requirements for a DG Trailer

Trailer BAE Wing Tank Test System

Custom Trailer for testing Wing Tanks on Hawk 127 Jet Trainer with BAE

TOLL Rescue Helicopter Refuel Installation at Bankstown Airport

This was a major project for AFSE – involving 2 x 22,000 self-bunded JET storage tanks, infill and decanting pump systems, underground distribution pipeline to multiple hydrant points.

Trailers Aviation with Dangerous Goods Approval

Australian Fuelling Systems & Equipment was granted DG Approval in 2000 for our inhouse designed 2000 litre trailer that was compliant with all of the requirements for transporting Class 3 Flammable Liquids (ULP, Avgas, Jet-A1, Mogas) on public roads.

Tanks Equipped with Dispensers

AFSE can fully configure our range of small tanks with dispensing equipment to suit customer requirements.

Tanks 5000L Self-bunded for World Fuel with OPT

We’ve built many of our 5000 litre self-bunded aviation fuel tanks for World Fuel Services.

Trailer JET-A1 Aviation 5000L with over and under wing nozzles

5000 litre JET-A1 Refuelling Trailer – with under and over wing nozzles. This unit built for airside use only.

Pumps Engine Powered Aviation

AFSE has designed and built many portable engine-powered aviation fuel transfer pumps.

Pumps DC for Aviation Fuels

A portable configurable pump system for both AVGAS or JET-A1

Pumps Mains Powered 415v & 240v Aviation

AFSE have built and designed many variations of 240v pumps for small airports and private airstrips to be installed on to existing storage tanks or containers.

Hydrant Cart JET A1 - NSW Health

AFSE was approached to provide an updated hydrant cart to refuel NSW Air ambulance aircraft at their Bankstown base.

Helicopter Refuel Systems

Complete storage and dispensing systems for rescue helicopters

Airports

AFSE has been requested over the years to design and install refuelling facilities at remote aerodromes, which are usually owned and operated by the local Council.

Tanks Stainless for Aviation Fuels

Tanks for Aviation Fuels

LET'S GET STARTED ON YOUR SOLUTION, TODAY

For everything from self-bunded storage tanks for farms, to tailor-made aluminium or stainless trailer refuelling systems for aviation, we work with the best brands to create the perfect fuelling setup.

Worker in safety gear operating hose from a large tanker truck at an industrial site.